All Beetle Trap Kit with RTU Gel Cartridge (IL-2750)
This kit includes complete three-part All Beetle traps and multi-species beetle and moth attractants in a pheromone gel to monitor for the presence of food infesting insects.
This kit includes complete three-part All Beetle traps and multi-species beetle and moth attractants in a pheromone gel to monitor for the presence of food infesting insects.
This kit includes complete three-part All Beetle traps and multi-species beetle and moth attractants in a pheromone gel to monitor for the presence of food infesting insects.
Product Description
Working closely with the pest control industry, Insects Limited recognized pest control operators and residential customers alike needed a Ready-To-Use (RTU) device to monitor for beetles that could fit in areas suspected of insect infestation without taking much space.
This kit includes complete three-part All Beetle traps and multi-species beetle and moth attractants in a pheromone gel to monitor for the presence of food infesting insects.
The All Beetle trap has a clear view lid for easy inspection, a sturdy polypropylene base and a replaceable tray that easily snaps in from below.
This low-profile trap slides easily beneath equipment or fits nicely into corners or along walls.
How It Works
Features and Benefits
The All Beetle Trap Kit with RTU Gel Cartridge will allow you to monitor the areas needed to help determine:
If there is a presence of insects in the suspected area? If yes, then this All Beetle Trap Kit with RTU Gel Cartridge can help pinpoint the infestation.
Is the numbers of insects present increasing or decreasing? If continuing to increase, further investigation or professional measures need to be taken.
If the control measures (E.g. removal of infested product, increased sanitation, freezing of infested products, etc), that you have taken are working to reduce pest numbers or not.
How the All Beetle Trap compares to other products on the market
Each All Beetle Trap Kit with RTU Gel Cartridge comes with 10 sets of the clear top, blue base, and snap-in replaceable tray as well as 10 packets of the multi-species food infesting insect attractant to help ensure there are no insects in the food you are trying to protect.
The All Beetle Trap Kit with RTU Gel Cartridge has been tested by multiple third-party professionals in both the entomology lab and the field and has proven to be the most effective device on the market. Because of its clear top, this All Beetle Trap Kit with RTU Gel Cartridge is the easiest on the market to place out and inspect.
Competing traps take too much time and effort. The All Beetle Trap Kit with RTU Gel Cartridge allows the user to simply peel-off the foil seal, snap it into place in the trap and it is ready to go.
Another benefit for a professional is the reduction of time spent walking to each device, kneeling, taking off the top, and counting the insects captured in an already-too-small, adhesive area.
The clear top of this All Beetle Trap Kit with RTU Gel Cartridge allows professionals to simply glance down at the device to clearly see if there is a presence of insects. If not, the pest professional simply keeps moving to the next trap, allowing more time for inspection. The loop on the top of the All Beetle trap allows the device to be tethered to a permanent object, therefore reducing the possibility of a lost device as well as lost insect data.
To ensure the lid will not pull off with the tether, Insects Limited has designed the trap with deeper hooks as well as securing joints between the clear top and the blue base. The top is vented in three places to allow for the disbursement of insect pheromone and kairomone attractant.
How the All Beetle Trap Kit with RTU Gel Cartridge is Designed
The gel was conveniently designed using insect pheromones and a food attractant as a clean way to monitor for the presence of insects from multiple species. The attractant gel has already been placed into the trap cartridge. The user only needs to peel off the foil seal and it is ready to use.
The All Beetle trap was methodically designed by entomologists who work with and study the target insects every day, and who understand the needs of an easy-to-inspect device. They ensured the device lay flat so as to not introduce any obstacles for the insects to climb.
The slope of the device is mathematically calculated to ensure the insects will create momentum ascending the trap, and meets a curved edge forcing the insect to fall into the adhesive to be captured instead of making the decision to descend back down the slope preventing capture.
Our entomologists spent hours observing the insects to determine a texture of the slope to compliment the insect’s behaviors that were observed.
How This Product Can Help You
How to be certain this is the right product for your needs:
Pheromone monitoring is tedious, but necessary. Through third party efficacy confirmation, and the forethought of an easy-to-inspect clear top, the All Beetle Trap Kit with RTU Gel Cartridge will ensure you are getting the most accurate insect data while making your inspection efficient and allowing you to determine the problem quickly.
What to Expect with Your Order
Many customers purchasing the All Beetle Trap Kit with RTU Gel Cartridge do so because they suspect the presence of food infesting insects.
Once you receive your order of All Beetle Trap Kit with RTU Gel Cartridge, take them out of the box. The combination pheromone/food attractant gel cartridges need only to have their foil seals torn off and snapped into the blue base of the trap.
When the All Beetle Trap Kit with RTU Gel Cartridge is loaded with its attractant, place the device on a flat surface roughly 2-5m (5-15ft) apart.
Depending on the levels of infestation, insect catches could happen within 24 hours to two weeks.
The Story Behind the Trap
Who made it?
The All Beetle trap was designed by Insects Limited entomologists and tested by pest control operators. We decided to manufacture the product with a plastic injection company local to Indiana.
What inspired its creation?
As a company based in science, innovation, and quality products (and education), our entomologists realized there was no trap available in the market created with the behavior and biology of the insects taken into account.
We also knew the need for a trap that was easy to inspect. The All Beetle trap is the only monitor available that was designed thinking of both the science of the insect and the art of pest control.
Obstacles We Overcame to Make a Great Product
Getting the dimensions of the trap correct was difficult. Some insects crawl well. Others have more trouble.
In particular, our trap was designed to suit the needs of the weakest crawling insect, the flour beetles. These beetles have little hairs on their tarsals (feet), making it difficult to climb up smooth surfaces.
Our entomologists spent many hours observing these insects attempting to climb different iterations of the trap. After purchasing the device, be sure to take note of all of the intricate details included because of our scientific observations.
How was the product tested?
We first start with intense lab testing. Our entomology lab has 1x1 meter arenas set up where we actively attempt to create an environment the insect will not want to leave.
We give them everything they need, but we also present them with the opportunity to travel to our trap and the attractant inside. If our attractant and trap can pull the insect out of the optimal environment in the lab then we are ready to test the devices in the field.
We have created relationships with some of the best pest control operators in the industry. We trust these PCOs to test our products thoroughly and give us honest feedback. If we receive not only positive feedback, but feedback that our product works better than others, then we are ready to take our design to manufacturing and make it available to everyone.
Shipping Information
We understand every dollar counts. We’ve negotiated the best shipping rates on your behalf. If you have any questions about shipping, please give us a call at 317-896-9300.
Each set of 10 has dimensions of 6 inches X 6 inches X 4 inches and weighs 1 lb for shipping purposes. Online customers can choose their shipping options at checkout. Orders placed before 3pm EST typically get processed that day. If placed after 3pm EST, your order will be processed the next business day. Orders are shipped Monday-Friday.
We currently cannot accept a PO Box as a shipping address. All US orders are shipped via FedEx/UPS. Be sure to include a valid street address as they will not deliver to a PO Box.
All Canadian orders are shipped via USPS. While we don't expect delays, sometimes this can happen when the package goes through customs. If you would like to have your package shipped via UPS, please give us a call at 317-896-9300. Please note, that a brokerage fee will apply, on top of the shipping cost, when the package arrives in Canada.
Questions about your order?
If you have any questions, please give us a call at 317-896-9300.
Additional Pest Solutions
Our online store hosts our most popular products. Not seeing what you're looking for? View our complete Pest Solutions Product Guide for an expanded list of our pest solution products.
